OASE MINI - MIDI Pump Parts

Discharge Housing

The discharge housing is attached to the suction housing with six bolts and washers. The threads where the nozzle attaches are REVERCE so they turn in the opposite direction that you would think.

Part #82109 - $ 70.00

"O" Ring

The "O" Ring is used to seal the suction housing to the discharge housing. It fits into the groove located in the discharge housing

"O" Ring - Part #82108 - $ 7.50

1/2 • 3/4 • 1 HP Impeller

The Impeller on the 1/2 HP 3/4 HP and the 1 HP pump is attached to the splined shaft of the motor.

1/2 HP Impeller - Part #82111 - $ 56.00

1 1/2 • 2 HP Impeller

The Impeller on the 1 1/2 HP and the 2 HP pump is attached to the splined shaft of the motor.

1 1/2 HP Impeller - Part #82141 - $ 56.00

Suction Housing

The suction housing is attached to the discharge housing with six bolts and washers on the top and the motor mount on the bottom.

Part #82113 - $ 76.00

Motor Mount

The suction housing is attached to the Motor Mount with three bolts and washers on the top and four nuts attach the motor mount to the motor on the bottom.

Part #82122 - $ 96.00